Powerful Three Way Catalytic Converter Cleaner Can Solve Engine Problems OEM

Three-way Catalytic Converter Recovery Tool Can Solve Engine Problems

Function:

Three-dimensional catalyst full-effect unclogging agent:This product adopts high-tech water-based formula, with strong decontamination ability, can quickly remove sulfur and phosphorus complexes and various deposits on the surface of the three-way catalytic converter, unblock the three-way catalytic converter, restore the three-way catalyst activity, reduce carbon monoxide hydrocarbon and nitrogen oxide emissions.
Three-dimensional catalytic full-effect reducer:This product is used to clean and maintain the three-way catalytic converter, activate the catalytic function of platinum, vantage,and other precious metals on the surface of the three-way catalytic converter, restore the activity of the three-way catalytic converter, improve the exhaust gas conversion rate, reduce exhaust emissions,and extend the service life of the three-way catalytic converter.

Product Advantages:

• Functional complementation, synergistic effect
  The unclogging agent is responsible for clearing blockages, removing sediments (such as sulfur and phosphorus complexes), and restoring the smooth passage;
  The reducing agent activates the precious metals (such as platinum, palladium, and rhodium) on the surface of the catalyst to improve the catalytic efficiency;
  The two are used together to fully repair and restore the performance of the three-way catalytic converter, which is far better than a single cleaning product.

• Powerful cleaning + active reduction, full performance restoration
  The unclogging agent has a high-tech water-based formula that can powerfully remove dirt and quickly unclog three-way catalytic blockages;

  The reducing agent can activate the active sites of precious metal catalysis and fundamentally restore the catalytic conversion function.

• Significant environmental performance, reducing pollutant emissions
  Significantly reduce CO (carbon monoxide), HC (hydrocarbons), and NOx (nitrogen oxides) emissions;

  Improve tail gas conversion efficiency, meet or approach higher environmental emission standards.

• Extend service life and save maintenance costs
  Effectively extend the life of the three-way catalytic converter and avoid the high cost of replacing parts;

  It is an economical and efficient preventive maintenance solution.

Operation Specifications:

Step 1: Use a three-way catalytic converter (cleaning)
Make sure the engine is warm (not cold or overheated).

Spray the converter through the intake system or into the front end of the three-way catalytic converter (depending on the product packaging instructions):

If it is a spray type:
it can be injected through the oxygen sensor hole, EGR port, throttle and other interfaces;

If it is a fuel addition type:
it can be directly added to the fuel tank (it is necessary to confirm whether the product is suitable for this method).

Start the vehicle and run it at idle speed for 10-15 minutes to allow the agent to fully decompose the sediment;

You can increase the speed (2500-3000 rpm) for a short time to enhance the cleaning effect;

After completion, you can conduct a short-distance test drive (5-10 kilometers) to remove impurities.

Step 2: Use three-way catalytic full-effect reducing agent (activation)
After cleaning, wait for the engine to cool down to a safe temperature before using the reducing agent;

Inject in the same way (such as the air intake, sensor interface, or add fuel according to the instructions);

Start and keep idling or driving normally for 15-20 minutes to enable the reducing agent to activate the precious metals;

It is recommended to drive more than 20 kilometers to help the three-way catalytic converter fully restore its catalytic performance.

Notices:

• Choose the correct channel: confirm which injection method (injection/fuel addition) the unclogging agent/reducing agent supports.

• Do not use it when the car is cold or the engine is overheated to avoid poor results or damage.
• Do not inject directly into the exhaust pipe or the tail end of the three-way catalytic converter;
• Before use, please check whether the vehicle's three-way catalytic converter is in a maintainable state (such as not damaged or melted);
• It is recommended to use it once every 8,000-15,000 kilometers as a maintenance cycle;
• Please operate in a well-ventilated place during use and stay away from open flames;
• If the engine fault light (MIL light) is on, the fault code should be checked first to avoid misjudging it as a catalyst problem.