Brake Anti-Squeal Paste 50g – Noise Reduction & Anti-Seize Protection

Key Benefits

• Brake noise reduction: Helps reduce squeal associated with vibration at brake pad contact points.
• Protection against sticking: Helps prevent brake pads from seizing at treated contact points under high-temperature conditions.
• Corrosion resistance: Helps protect treated metal surfaces against water and salt corrosion.
• For ABS-equipped vehicles: Suitable for brake maintenance on vehicles with ABS, as stated on the packaging.
• Wide temperature range: Packaging-stated range of −40°C to +1400°C. Refer to technical data for the applicable service conditions.

Application Areas

Apply to brake pad backing plates and the sliding grooves at both ends of the pads, where specified by the brake manufacturer. Intended for professional brake servicing and pad installation.

Product Specifications

*The packaging does not specify the test method, exposure duration or performance criteria for this range. It should not be interpreted as a continuous lubrication rating up to +1400°C.

Directions for Use

1. Follow the vehicle and brake component manufacturer's service instructions. Allow brake components to cool before working.
2. Clean and dry the designated contact areas. Inspect pads, shims and hardware before reassembly.
3. Wear suitable protective gloves and apply a thin, even layer to the specified areas on the pad backs and sliding grooves at both ends.
4. Remove excess paste and keep all friction surfaces free from contamination.
5. Reassemble and check brake operation according to the manufacturer's service procedure.

Frequently Asked Questions

Will it eliminate every type of brake noise?

It is intended to help reduce contact-related squeal. Worn pads, damaged discs, incorrect installation and other mechanical faults require inspection and appropriate repair.

Can it be applied to the braking surface?

No. Apply only to specified non-friction contact areas. Keep the pad friction material and disc friction surfaces clean.

Is it suitable for caliper guide pins?

The supplied packaging specifies pad backs and pad-end sliding grooves. Guide-pin and rubber compatibility are not specified; use the lubricant required by the brake manufacturer for those parts.

Handling & Storage

Keep out of reach of children. Store below 50°C in a dry, ventilated place away from sunlight, flames and heat. Follow the product label and Safety Data Sheet for handling precautions and first-aid instructions.