|
| Brand Name: | Biaobang |
| Model Number: | VD10091 |
| MOQ: | 50 pieces |
| Payment Terms: | L/C,T/T,Western Union |
| Supply Ability: | 100000 pieces per month |
This advanced Condensed Foam Cleaner utilizes high-performance surfactants and imported raw materials to remove surface stains, fine scratches, and residues while forming a dense protective layer on automotive paint. It provides long-lasting water, dust, UV, and oxidation resistance, restoring the vehicle’s surface to a smooth, glossy, and “like-new” finish with effortless application.
Applicable Materials: Automotive paint, varnish-coated surfaces, clear coat finishes
Ideal For
Routine vehicle cleaning and maintenance
Removing light surface stains, fine scratches, and watermarks
Enhancing paint protection and longevity
Providing a hydrophobic, dust-proof, and UV-resistant finish
How to Use:
Pre-Rinse Vehicle Surface
Rinse the vehicle thoroughly with clean water to remove loose dirt, dust, and debris.
Apply Foam Cleaner
Dispense or spray the condensed foam evenly onto painted surfaces, ensuring full coverage. For concentrated formulations, dilute according to the recommended ratio.
Allow Penetration
Let the foam dwell for a few minutes to emulsify stains, light scratches, and surface contaminants.
Gentle Agitation
Use a soft microfiber mitt or sponge to gently work the foam over the surface, lifting dirt and debris without causing scratches.
Remove Residue
Rinse thoroughly with clean water or wipe off with a clean microfiber cloth, ensuring all foam and loosened contaminants are removed.
Drying & Finishing
Dry the surface with a microfiber towel or allow it to air-dry. The protective layer formed by the formula will leave the paint glossy, hydrophobic, and protected.
Cautions:
External Use Only – Intended for automotive surfaces; do not use on interior or non-automotive materials.
Surface Temperature – Do not apply on hot surfaces or under direct sunlight to prevent streaking or premature drying.
Application Tools – Use only soft, non-abrasive tools such as microfiber mitts or sponges; avoid brushes or abrasive materials.
Skin & Eye Contact – Although formulated to be low-irritating and pH-neutral, avoid prolonged skin contact. In case of eye contact, rinse immediately with plenty of water and seek medical advice if irritation persists.
Ingestion – Do not swallow. Seek medical attention immediately if accidentally ingested.
Storage – Keep tightly closed in a cool, dry, well-ventilated area. Avoid heat, direct sunlight, and freezing conditions.
Keep Away from Children and Pets – Store safely out of reach.
Do Not Mix with Other Chemicals – Use product as intended.
