443ml Engine Bay Cleaner OEM For Auto Repair Rapidly Dissolves Carbon

Special Carbon Deposit Cleaner For Auto Repair Rapidly Dissolves Carbon 

Function:

This product is specially used for cleaning the inside of the engine. It has strong cleaning power and high cleaning efficiency. It only takes 3 minutes without dismantling the engine to quickly remove carbon deposits, colloids and oxidation sediments in the crankcase, piston, rings, main and fine oil channels. After use, it can improve engine operating efficiency, reduce failures, increase horsepower and extend engine service life.

Product Advantages:

• No need to disassemble, 3 minutes of ultra-fast cleaning

  No need to disassemble the engine, saving labor and time costs, and efficient cleaning can be completed in just 3 minutes, which is suitable for efficient operation of fast repair chains and auto repair shops.

• Powerful removal of stubborn carbon deposits

  Professional formula, deeply removes carbon deposits, sludge, colloid and oxides in core parts such as crankcases, pistons, rings, oil channels, etc., and restores the engine to a clean state.

• Increase power and reduce failures

  After cleaning, the engine runs more smoothly, effectively improves compression and power output, reduces engine noise and wear, and reduces abnormal vibration and carbon deposit failure rate.

• Extend engine service life

  Reduce wear and high temperature problems caused by carbon deposits, delay engine aging from the source, and extend the life of core components of the vehicle.

• Widely adaptable, safe and efficient

  Applicable to a variety of gasoline engine types, mild and non-corrosive to metals and seals, safe and reliable to use, and car owners can use it with more peace of mind.

Operation Specifications:

1. Preheat the engine

   Start the vehicle and run the engine to normal operating temperature (idle for 3-5 minutes).

2. Turn off the engine

   Turn off the engine to ensure safe operation.

3. Add carbon cleaner

   Open the engine oil filling port and pour the entire bottle of carbon cleaner into the crankcase (i.e. the oil filling port).

4. Start the engine again

   Start the engine and keep it idling for 3-5 minutes, do not run at high speed, and avoid load.

5. Replace the engine oil and filter

   After cleaning, replace the engine oil and filter immediately, drain the dirty oil and cleaning residual liquid to prevent impurities from remaining.

Notices:

• The oil and filter must be replaced

  This product is a strong detergent that will bring out a lot of carbon deposits and impurities. Failure to replace the oil after use will seriously affect the engine.

• Not suitable for diesel engines

  Please confirm the vehicle engine type. It is only used for gasoline vehicles.

• Avoid too long idling time

  The cleaning time can be controlled within 3-5 minutes. Too long time may cause overheating or detergent dilution of the oil.

• Be careful when operating

  Avoid hot oil splashing when adding; the operating place should be well ventilated and away from open flames.

• Do not use for engines that are severely worn or about to be overhauled

  If the engine itself has serious problems such as poor piston ring sealing, large amounts of oil burning, and heavy carbon deposits, it is recommended to repair it before use.