Multi-purpose Spray Paint Diy And Professional Repair Options

APPLICATION:

Multi-purpose Spray Paint is suitable for almost all industrial, household, mechanical, DIY and other materials.

DIRECTIONS FOR USE:

1. Storage Preparation
   Before use, bring the can to room temperature.
   For detailed instructions, refer to the label on the back of the can.
2. Surface Preparation
   Sand, clean, and degrease the area to be sprayed to ensure optimal adhesion.
3. Environmental Requirements
   The optimal spraying temperature is between +10°C and +25°C.
4. Shake the Can
   Shake the can thoroughly for approximately 3 minutes before use to ensure even mixing of the paint.
5. Test Spray
   Before spraying, spray an inconspicuous test area to verify color and effect.
6. Spraying Procedure
   Apply in multiple, thin coats, maintaining even coverage between coats.
   Keep the can approximately 25–30 cm from the panel surface.
7. Nozzle Cleaning
   After spraying, hold the can upside down and spray for approximately 5 seconds to clean the nozzle and prevent clogging.

WARNINGS:

• Pressurized container: May burst if heated or punctured.
• Ignition Source: Keep away from open flames, sparks, and hot surfaces; no smoking.
• Heat/Sunlight: Avoid direct sunlight and temperatures exceeding 50°C.
• Health Risks: May cause eye irritation, dizziness, or drowsiness; repeated contact may cause skin dryness or cracking.
• Child Safety: Keep out of reach of children.

• Emergency Measures:

  Eye Contact: Rinse immediately with water for several minutes. Remove contact lenses, if present. Seek medical attention if discomfort persists.

  Inhalation: Remove to fresh air. Seek medical attention if symptoms persist.