How to Wax a Car the Right Way: Full Instructions

Want a showroom-quality shine on your automobile that will last? Whether applying by hand or with an electric buffer, this Biaobang Wax guide shows how to properly wax your vehicle with specialized automotive wax, ensuring your panels shine while receiving a long-lasting protective finish.

Few of us have the time to spend hours properly maintaining our cars. However, with the correct car-care solutions, dull or damaged paintwork may be transformed into a professional-looking finish in a fraction of the time. Regular waxing not only restores shine, but it also protects panels from sun exposure, environmental toxins, and cosmetic damage, keeping your vehicle's appearance and value.

Most automobile waxes are made mostly of carnauba wax, which is obtained from Brazilian palm leaves and is widely used in a variety of commercial industries. This is generally coupled with extra natural waxes and synthetic polymers to provide the deep, glossy finish visible after waxing. Biaobang Wax offers a variety of wax formulations, including innovations such as Smart Shield and Hybrid Technology, allowing you to choose the best product based on your chosen application method and desired end result.

PREPARATION FOR WAXING

REMOVE DIRT & GRIME

• After extensive washing with a specialist shampoo to take off loose dirt and grime, use plenty of clean water to remove any trace of suds and then dry the panels thoroughly. Biaobang Wax produces a wide range of car care shampoos, including the ever-popular Biaobang Wax -Power Car Wash, which is the only wash that increases the pH cleaning power, making it suitable for any cleaning task and even the toughest dirt.
• Alternatively, give the new Biaobang Wax Snow Foam a go. It can be applied by hand or with a foam gun and leaves a luxurious lather which won't strip waxes and sealants on the car surface, which is especially important for those who frequently detail their car.

TACKLE DEFECTS

• Polish the car’s surface carefully, focusing on the panels to correct imperfections. When applied correctly, the polish’s mild abrasive properties help remove any remaining layers of wax, as well as grease and dirt, exposing the undamaged paint beneath. For optimal results, consider using Biaobang Wax Clean Finish Polishing Compound.
• Remove any defects in the paintwork. If your vehicle's surface has noticeable swirls or light scratches, a more abrasive substance might help restore the paintwork. Biaobang Wax Scratch Repair & Renew is specifically designed for this application. It incorporates Heal & Seal technology and protective resins, allowing it to restore years of damage in a single application while maintaining a protective barrier for long-term restoration.

Benefits of Waxing Your Car's Surface

• Waxing protects the newly revealed coat.
• When done properly, it will act as a protective coating, keeping your car looking shiny and fresh regardless of its age.
• Finally, it may reduce the requirement or frequency of car polishing entirely.

BEST CONDITIONS FOR WAXING

• First and foremost, do not attempt the operation in full sunlight or under freezing temperatures.
• Car wax works best when applied at the proper, cool temperature, so work in the shade on a hot day or in a garage on a chilly one.
• Another benefit of working indoors is that you prevent contamination from bird droppings and other airborne pathogens.

WHAT TYPE OF WAX SHOULD I USE

• Waxes exist in a variety of forms, the most common being sprays, liquids, and pastes.
• Spray wax is often the quickest to apply; however, make sure you shake the bottle thoroughly first.
• Paste wax is more difficult to apply and consequently takes more time, but it produces longer-lasting results.
• Liquid wax falls somewhere in the middle of the effort vs. outcome scale. Shake again before using to ensure that the components are properly mixed.

Our selection of vehicle waxes is broad and includes all of the previously described forms of car wax, allowing you to select the product that is best for you and your needs. Budget-friendly solutions also allow you to experiment with a variety of formulations without breaking the bank.

SPRAY WAX APPLICATION

• Step 1: Spray the wax, such as our best-selling Biaobang Wax ICE Spray Wax, directly on the car surface, working on one section at a time.
• Step 2: Rub in the wax with one side of a damp microfiber towel. Take your time on each panel to achieve the best result.
• Step 3: Buff out the remaining product with the other, clean side of the microfiber towel.
• Step 4: Repeat the process if needed.

If you don't have time to properly prep your car but still want a super-slick finish, try our new Biaobang Wax, which contains carnauba wax and can be used on both dry and wet vehicles.

LIQUID AND PASTE HAND APPLICATION

• The process takes a little longer, but the result will be well worth your elbow grease.
• Step 1: When applying liquids and pastes, such as Biaobang Wax, a dampened special foam applicator pad will be invaluable. Apply a small amount onto the foam polishing pad and buff using circular motions.
• Step 2: Reapply if needed using the same motion.
• Step 3: Use a clean, soft microfibre towel to give the bodywork a thorough wipe over and buff, checking reflections and gaps from all angles to ensure you have removed every last trace of product.

WHEN TO USE A BUFFER / DA ORBITAL

• Using an electric, rechargeable, or pneumatic buffer instead decreases the amount of time spent waxing. However, give yourself time to become acquainted with the technique before confronting your pride and joy.
• Buffers are better suited for cars with large, flat panels. Smaller automobiles with multiple undulations and fissures can be more difficult to work with, so keep this in mind when selecting the best application method for you.

HOW TO WAX A CAR WITH AN ORBITAL POLISHER

• To boost your wax results and give it a pristine finish, use Biaobang Wax Scratch Repair & Renew with an electric buffer to remove tiny scratches and swirl marks first.
• Step 1: Apply the wax using a specialist applicator placed over the buffer pad.
• Step 2: Initially, don’t turn the buffer on, but apply the wax to the vehicle using a large circular motion.
• Step 3: Now switch on the machine and glide it across the surface while applying minimal pressure.
• Step 4: Work in the same direction as the metal ‘flows’, and then, when the car is completely covered in product, let the wax completely dry to a haze.

FINISHING STEPS

• Step 1: Replace the buffer's wax applicator with a microfiber cloth, preferably a special wax-removing microfiber cloth, to speed up the procedure.
• Step 2: Use this to buff off the dried wax with long, smooth strokes. Avoid buffing in a circle since it can cause swirl marks on your paint.
• Step 3: Most importantly, just guide the tool and avoid applying too much pressure.

HOW TO WAX A BLACK CAR

• Because black automotive paintwork reveals flaws more quickly, specific colored wax products are advised for a great finish. Biaobang Wax offers a complete line of black wax and polish solutions designed specifically for black cars to remove defects and protect the black paintwork, which is prone to UV damage and swirl marks.
• For the most convenient and speedy application, we recommend the Biaobang Wax Jet Black Spray Wax, which has an industry-leading black-tinted solution.
• Step 1: Shake well prior to the application. Apply on a clean surface and out of direct sunlight.
• Step 2: Spray on one section at a time and wipe with a microfiber cloth.
• Step 3: Turn the cloth and wipe to a high gloss shine.

HOW TO REMOVE WAX FROM CAR TRIM

• Depending on the wax product and application method, you may see residue buildup on the trim. To avoid this, check the product directions to see if it is okay to use on trim, and if not, cover the area before applying.
• However, if you find yourself in this circumstance and are looking for a technique to remove wax from car trim, Biaobang Wax Trim Restorer will restore the trim's original beauty and sheen.
• Step 1: Shake well. Squeeze a ribbon of product onto the foam applicator.
• Step 2: Wait 5 to 10 minutes for products to penetrate.
• Step 3: Lightly wipe with a clean, dry microfiber cloth.
• Step 4: Additional application is usually needed for trim with wax residue, so assess the results and repeat the steps if needed